Need Help? Use Our Ramp Calculators

Two Front and Two Rear Trailer Mate Tie Down Ramps

Free Shipping
$366.00
ITEM RR-TM-F-R
Select Description:
In Stock. Delivered in 3 to 5 Business Days

This complete set of two front Trailer Mates and two Rear Trailer Mates will eliminate the hassle and stress of getting your low profile, track car or sportscar safely tied down in your trailer without scraping the front bumper. Trailer Mates add 3 inches of ground clearance so that you have more room to reach your vehicle's tie-down points, and in some cases, open the door over the trailer wheel well.

The front Trailer Mates feature a concave depression that helps keep the vehicle from rolling during transport. The rear Trailer Mates are designed to simply drive right over, making placement a snap. Each lightweight ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. The front Trailer mates have a 7-degree approach angle, and the rear Trailer Mates have a 10.9-degree approach angle.

These ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. They won't slide on any surface, including smooth floors and icy conditions.

Tire Width
Tire Width
12" maximum width
Weight Capacity
Weight Capacity
1500 lbs. per ramp
Set of Four
Set of Four
4 ramps included
100% SOLID
100% SOLID
Exclusive high-density foam
Anti Slip/Skid
Anti Slip/Skid
stays in place on any surface
Two Front and Two Rear Trailer Mate Tie Down Ramps
30 Day Guarantee
Satisfaction or money back
Two Front and Two Rear Trailer Mate Tie Down Ramps
Made in USA
and proud of it

Make sure you can sail right up your service ramps!

Use the calculator below to determine your vehicle's maximum angle of approach. Then shop for any Race Ramps with an angle equal to or less than your result.

To determine the best angle of approach for your vehicle, we have devised the “yardstick test” below. If you do not have a yardstick, carefully measure out 36" with a tape measure or other straight, rigid object. You may need two sets of hands to get an accurate measurement here.

YARDSTICK TEST

1

Place a 36" yardstick or tape measure at the base of your front wheel.

2

Raise up the yardstick or tape measure until it hits the underside of your car (the spoiler).

3

Measure vertically from the ground to the end of the yardstick or 36" point on the tape measure. Record that height below in inches.

Specifications
Set of four
72-3/4"
28"
8-1/2"
25 lbs.
3"
1,500 lbs.
Expanded foam with traction coating
Black
Reviews // Q&A