FREE SHIPPING on orders over $99! Some exclusions apply.
Need Help? Use Our Ramp Calculators

8" H Extra Large Solid Trailer Ramp - 6.3 Degree Approach Angle

RR-TR-8XL
Free Shipping
$453.00
ITEM RR-TR-8XL
In Stock. Delivered in 3 to 5 Business Days

If your trailer door is too steep to get your car to the track or autocross, use the 74-inch long Trailer Ramp to decrease your angle of approach to 6.3 degrees. These ramps are constructed using an exclusive, patent process. They are 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong yet durable. This ramp will not slide, scratch, or otherwise damage any floor type and can hold up to 1,500 pounds per ramp for a total vehicle weight capacity of 6,000 pounds.

This hassle-free, lightweight ramp weighs 14 pounds and is ideal for low-ground-clearance cars. It can accommodate tires up 12 inches wide, and has a strap for easy placement. To use it, simply lower your trailer ramp down into the notch and drive your car up and into your trailer - it's that easy! The notch size measures 5 inches long by 2 inches wide.

8
30 Day Guarantee
Satisfaction or money back
8
Made in USA
and proud of it
Sold in Pairs
Sold in Pairs
2 ramps included
Angle of Approach
Angle of Approach
6.3 degrees
Anti Slip/Skid
Anti Slip/Skid
stays in place on any surface
Lightweight
Lightweight
14 lbs. per ramp
Tire Width
Tire Width
12" maximum width
Weight Capacity
Weight Capacity
1500 lbs. per ramp
100% SOLID
100% SOLID
Exclusive high-density foam
Trailer Ramp Calculator
Trailer Ramps

Is your trailer door too steep to get your car to the track or autocross? Are you tired of hauling around heavy, unsafe boards to use as a makeshift ramp extension? Race Ramps has the solution for you: simply place your trailer door on the notch of our specially-designed Trailer Ramps and decrease your angle of approach to as little as 4.3 degrees.

These hassle-free, lightweight ramps are ideal for low-ground-clearance cars with extra-wide tires. Numerous size options are available in our one- and two-piece designs, with and without flap cut-outs. Use our ramp calculator above to determine which Trailer Ramps will work best for your car and trailer, and let us know if you have any questions. We are happy to make a custom set if our standard options don't work—just give us a call!

Trailer Ramps are 100% solid, made with an exclusive patented process that coats high-density expanded foam with a traction surface for a lightweight ramp solution that is strong yet durable. The ramps will not slide, scratch, or otherwise damage any floor type and can hold up to 1,500 lbs. per ramp for a total vehicle weight capacity of 6,000 lbs.


Step 1: Your Trailer

Both enclosed and open trailers work with our Trailer Ramps. If your stock trailer ramps have an additional fold down ramp/flap, you can fold it up, remove it, or purchase a ramp that has a flap cut-out built into the ramp (check the appropriate box below).

1

Measure from the ground to the top of your current trailer door/ramp at the hinge point.

Step 1-1
2

Measure from the ground to the top of your current trailer door/ramp at the hinge point.

Step 1-2
3

Measure from the ground to the top of your current trailer door/ramp at the hinge point.

Step 1-3
Step 2: Your Car
4

To determine the best angle of approach for your vehicle, we have devised the “yardstick test” below. If you do not have a yardstick, carefully measure out 36" with a tape measure or other straight, rigid object. You may need two sets of hands to get an accurate measurement here.

YARDSTICK TEST

  1. Place a yardstick/tape measure at the base of your front wheel.
  2. Raise up the yardstick or tape measure until it hits the underside of your car (the spoiler).
  3. Measure vertically from the ground to the end of the yardstick or 36" point on the tape measure. Record that height here (in inches).
Step 2-1
Start by completing Step 1

Service Ramp Type Angle of Approach Maximum Tire Width
RR-TR-10-2 3.8° 12
RR-TR-5 4.3° 12
RR-TR-11-2 12
RR-TR-4 5.5° 12
RR-TR-9-FLP 5.5° 12
RR-TR-7 5.5° 12
RR-TR-7-FLP 5.5° 12
RR-TR-8XL 6.3° 12
RR-TR-6 8.2° 12
RR-TR-8 8.7° 14
trailer-side-kicks 13° 10
RR-TR-8XL 8 H Extra Large Solid Trailer Ramp - 63 Degree Approach Angle
Specifications
Pair
74"
14"
8"
6.3°
1,500 lbs.
12"
14 lbs.
Black
Expanded foam with traction coating
Usage
Please ensure that your ramp is damage-free before use. Never use two ramps on the same side of the vehicle. Use on a flat, level surface and ensure that the ramp makes full contact with the ground. Check that your steering wheel is straight and drive up at a slow, steady pace.
Reviews // Q&A