Skip to Main Content Skip to Footer Content

Xtenders for 67" Race Ramps – 6.6 Degree Approach Angle

$205.21
MSRP
Pricing shown as of 5/14/2026. Please note that prices are subject to change without notice.
Select Width
ITEM #RR-EX-14
Free Shipping

Key Features:

  • Extension for 67" Race Ramps
  • Decrease angle of approach to only 6.6 degrees
  • Set of two

See More…

Will this work with my car?
Features

Optional Xtenders for 67" XT Race Ramps

These 14" W Xtenders (RR-EX-14) are designed to work specifically with 67” Single-Piece XT Race Ramps & 67” Two-Piece XT Race Ramps.

Technology & Features
Tire Width-Icon
Tire Width-Icon
12" maximum width
Angle of Approach-Icon
Angle of Approach-Icon
6.6 degrees
Sold in Pairs-Icon
Sold in Pairs-Icon
2 ramps included
Lightweight-Icon
Lightweight-Icon
10 lbs. per ramp
High Density Foam-Icon
High Density Foam-Icon
Exclusive high-density foam
Anti Skid-Icon
Anti Skid-Icon
stays in place on any surface
Race Ramps™ Xtenders for 67
30 Day Guarantee
Satisfaction or money back
Race Ramps™ Xtenders for 67
Made in USA
and proud of it
RR-EX-14 Race Ramps Xtenders for 67 Race Ramps - 66 Degree Approach Angle
Specifications
Made in the USA
Sold As:
Pair
Length:
45"
Width:
14"
Height:
2-3/4"
Weight:
10 lbs.
Maximum Tire Width:
12"
Approach Angle Degree:
6.6°
Material:
Expanded foam with traction coating
Color:
Black
More Information

These Xtender Ramp extensions are designed to work with our 67-inch Race Ramps, and they reduce the angle of approach to 6.6 degrees for low profile cars.

They are a handy resource for garages and auto shops that work with multiple makes and models, or for the home enthusiast who might just need a slightly gentler incline to accommodate a new car, or a modded car with a lip or splitter. They can accommodate tires up to 12 inches and only weigh 10 pounds apiece. Once your car is parked at the top of your ramps, the extensions can be removed for additional work space – just remember to put them back before you drive down!

These ramp extensions are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. Please note: These Xtender ramps are designed to be used with 67-inch Race Ramps only. If you need a low angle of approach and would prefer not to use an extension, our 72-inch Race Ramps have a 6.8-degree approach angle and are a nice alternative.

  • Extension for 67" Race Ramps
  • Decrease angle of approach to only 6.6 degrees
  • Set of two
Usage Guidelines
Before using the ramps ensure other persons are clear of the vehicle and the ramps. Ensure that the ramps are free from damage or corrosion before use. Use only a single pair of wheel ramps at the front or rear, do not use two ramps on one side of the vehicle. Position the ramps in line with the wheels, with the steering wheel pointed straight and the incline against the tire tread. Carefully drive the vehicle onto the automotive ramps until it is in the correct position. Turn the engine off, apply the parking brake, get out of the vehicle and securely chock the remaining wheels on the ground. Before starting work, walk around the vehicle ensuring it is securely positioned. Always use a jack stand if a person will be going under the vehicle. On completion of the work, check the parking brake is still firmly on and remove the chocks. It is important to drive very slowly when coming off the ramps to prevent the automotive bodywork from making contact with the car ramp. Exercise caution when using these car ramps with a trailer or three wheeled vehicles.

This product is backed by a One Year Warranty.

Instruction Manual
WARNING: This product can expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Calculator
Make sure you can sail right up your service ramps!

Use the calculator below to determine your vehicle's maximum angle of approach. Then shop for any Race Ramps with an angle equal to or less than your result.

To determine the best angle of approach for your vehicle, we have devised the “yardstick test” below. If you do not have a yardstick, carefully measure out 36" with a tape measure or other straight, rigid object.

You may need two sets of hands to get an accurate measurement.

YARDSTICK TEST
yardstick test steps mobile
yardstick test step1
1

Place a 36" yardstick or tape measure at the base of your front wheel.

yardstick test step2
2

Raise up the yardstick or tape measure until it hits the underside of your car (the spoiler/splitter/air dam).

yardstick test step3
3

Measure vertically from the ground to the end of the yardstick or 36" point on the tape measure.

Record your height here.
Reviews
The average rating for this product is 5 out of 5 stars 54 Reviews
Q&A