FREE SHIPPING on orders over $99! Some exclusions apply.
Need Help? Use Our Ramp Calculators

Trailer Ramps

Put away the homemade plywood or lumber ramps and use our Trailer Ramps to bridge the gap between ground and trailer regardless of how low the clearance is for your car. For the time and money you put into your ride, you don't want to risk costly damage when a subpar ramp fails. Our trailer ramps are specifically designed to notch into your fold-down trailer doors for a smooth transition, with decreased angle of approaches as low as 4.3 degrees.

Trailer Ramp Calculator
Trailer Ramps

Is your trailer door too steep to get your car to the track or autocross? Are you tired of hauling around heavy, unsafe boards to use as a makeshift ramp extension? Race Ramps has the solution for you: simply place your trailer door on the notch of our specially-designed Trailer Ramps and decrease your angle of approach to as little as 4.3 degrees.

These hassle-free, lightweight ramps are ideal for low-ground-clearance cars with extra-wide tires. Numerous size options are available in our one- and two-piece designs, with and without flap cut-outs. Use our ramp calculator above to determine which Trailer Ramps will work best for your car and trailer, and let us know if you have any questions. We are happy to make a custom set if our standard options don't work—just give us a call!

Trailer Ramps are 100% solid, made with an exclusive patented process that coats high-density expanded foam with a traction surface for a lightweight ramp solution that is strong yet durable. The ramps will not slide, scratch, or otherwise damage any floor type and can hold up to 1,500 lbs. per ramp for a total vehicle weight capacity of 6,000 lbs.


Step 1: Your Trailer

Both enclosed and open trailers work with our Trailer Ramps. If your stock trailer ramps have an additional fold down ramp/flap, you can fold it up, remove it, or purchase a ramp that has a flap cut-out built into the ramp (check the appropriate box below).

1

Measure from the ground to the top of your current trailer door/ramp at the hinge point.

Step 1-1
2

Measure from the ground to the top of your current trailer door/ramp at the hinge point.

Step 1-2
3

Measure from the ground to the top of your current trailer door/ramp at the hinge point.

Step 1-3
Step 2: Your Car
4

To determine the best angle of approach for your vehicle, we have devised the “yardstick test” below. If you do not have a yardstick, carefully measure out 36" with a tape measure or other straight, rigid object. You may need two sets of hands to get an accurate measurement here.

YARDSTICK TEST

  1. Place a yardstick/tape measure at the base of your front wheel.
  2. Raise up the yardstick or tape measure until it hits the underside of your car (the spoiler).
  3. Measure vertically from the ground to the end of the yardstick or 36" point on the tape measure. Record that height here (in inches).
Step 2-1
Start by completing Step 1

Why Do I Need a Trailer Ramp?

You have a sportscar, a modded car, or a custom-built car with a low clearance and you wince every time you hear the front bumper scrape when you load it onto your trailer using the built-in, fold-down trailer ramp. It doesn’t take much to soften the angle, and we offer a calculator to make sure that you are perfectly matched with the ramps you need. Driving up the smaller angle over a longer distance compensates for the low ground clearance and keeps your bumper from touching the trailer.