67" XT Two Piece Race Ramps - 10.8 Degree Approach Angle
Key Features:
- Two-piece service ramp design elevates vehicles for easier access and compact storage
- 10.8 degree angle of approach; provides 10" of lift for tires up to 12" wide
- Easy to transport, use, and store; ramps won't transfer heat or cold, won't skid, and won't scuff your floors.
Designed to work with low profile and lowered cars, 67-inch XT Race Ramps provide 10 inches of lift for better access to the underbody of your vehicle.
These tough ramps are sold in pairs and can support up to 1,500 pounds each for a total vehicle weight capacity of 6,000 pounds. The two-piece design gives you the option to remove the ramp once your car is stabilized on the top portion for better side access during service or display in showrooms or at shows. The raised lip at the top of the ramp provides a gentle stop that reduces the need for a spotter, although we always recommend having one present. Their 14-inch width is designed to comfortably accommodate tires up to 12 inches wide. Positioning them or moving them for storage is easy, since each ramp only weighs 17 pounds and comes with a carrying strap.
These ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. They won't slide, scratch, or damage your floors, and won't conduct heat or cold from the surface to your tires, making them a versatile solution in hot or cold weather applications.
- Two-piece service ramp design elevates vehicles for easier access and compact storage
- 10.8 degree angle of approach; provides 10" of lift for tires up to 12" wide
- Easy to transport, use, and store; ramps won't transfer heat or cold, won't skid, and won't scuff your floors.
Use the calculator below to determine your vehicle's maximum angle of approach. Then shop for any Race Ramps with an angle equal to or less than your result.
To determine the best angle of approach for your vehicle, we have devised the “yardstick test” below. If you do not have a yardstick, carefully measure out 36" with a tape measure or other straight, rigid object.
You may need two sets of hands to get an accurate measurement.
Place a 36" yardstick or tape measure at the base of your front wheel.
Raise up the yardstick or tape measure until it hits the underside of your car (the spoiler/splitter/air dam).
Measure vertically from the ground to the end of the yardstick or 36" point on the tape measure.