Set of Four Scale Ramps – 8.7 Degree Approach Angle
Key Features:
- Glide right onto those racing scales
- Provides 2.5" of lift
- Each ramp can hold up to 1,500 pounds
The next time you reach for your racing scales, hold back on the jack and instead reach for this set of four Scale Ramps. They will save you time setting up, and provide 2.5 inches of height to get your car ready for positioning on your racing scales.
Each scale ramp can support up to 1,500 pounds for a total vehicle weight capacity of 6,000 pounds. The 8.7-degree approach angle allows low-profile cars to easily mount onto your scales. At only 1 pound per ramp, they are ideal for track days, auto shops or personal garages as they can be moved and transported with ease.
These Scale Ramps are manufactured using an exclusive, patented process. They are constructed of 100% solid, high-density foam with a rugged anti-slip coating that results in a lightweight ramp solution that is strong, yet durable. They won't slide on any surface, including garage and workshop floors.
- Glide right onto those racing scales
- Provides 2.5" of lift
- Each ramp can hold up to 1,500 pounds
Use the calculator below to determine your vehicle's maximum angle of approach. Then shop for any Race Ramps with an angle equal to or less than your result.
To determine the best angle of approach for your vehicle, we have devised the “yardstick test” below. If you do not have a yardstick, carefully measure out 36" with a tape measure or other straight, rigid object.
You may need two sets of hands to get an accurate measurement.
Place a 36" yardstick or tape measure at the base of your front wheel.
Raise up the yardstick or tape measure until it hits the underside of your car (the spoiler/splitter/air dam).
Measure vertically from the ground to the end of the yardstick or 36" point on the tape measure.